If you plan to work on your own automobiles, you will need the help of the best floor jack. Otherwise, it becomes much more difficult to get under the vehicle. We help you lift your vehicle with some top floor jack options. From the 2 ton jack to the 4 ton floor jack, we pick options for any budget and application.
We also look at how to determine what floor jack you need and show you how to use it. In no time, you will be a pro at doing your own oil or tire changes.
Table of Contents
What is a Floor Jack?
The floor jack is an automotive tool that helps you raise or lower your car. It’s used when you have automotive maintenance or repairs to perform.
You might need it to change a simple tire or perform extensive engine repairs. With the right jack on your side, the most complicated project becomes much easier.
Benefits of Using the Best Floor Jack
Having a high-quality floor jack is essential to getting your automotive work done with ease. Here are a few benefits to choosing the right model.
- Maintenance and repair is easier with the car lifted
- Can be used on many vehicle types
- Safe to use when instructions are followed
- Easy to use without any mechanical expertise
- Can be used with a variety of accessories for more functionality
Do You Need a Floor Jack?
There’s no need to purchase a floor jack if you don’t need one. It’s not required for all automotive work. For example, you wouldn’t lift your car if you are performing bodywork or buffing the paint. Additionally, some people prefer the use of a bottle jack, which is narrower but features a larger lifting capacity.
Yet a floor jack, used with stands, is the perfect option for some people. Here are some reasons you might consider finding the best floor jack.
- If you need stability. The floor jack is meant to provide stability when used with jack stands. The two used together provide redundancy to keep you safe.
- If you want something easy to use. Floor jacks provide an easy way to lift the vehicle. Because the jack will multiply the force applied, you can have the car in the air quickly.
- You need something reliable. Equipment used to lift heavy vehicles is going to endure a lot of stress, but the floor jack can take it. Unlike your drive-up ramps or bottle jacks, the floor jack is meant to last.
The floor jack isn’t for everyone. If you are looking for something portable, this might not be your best option. While there are some portable options on the market, the scissors jack is often easier to carry around.
Floor Jack Buying Guide: What to Look for
Before you purchase the first floor jack you see, you must take these factors into consideration. Don’t choose your next jack based on one factor, but by five if you want the best results.
Material Type
Floor jacks are made from several different materials. In fact, it’s one of the distinctions that tell the jacks apart from one another.
The steel floor jack is the heaviest. This metal creates a solid and reliable jack that won’t be moved easily from your garage. Because steel is cheaper than aluminum, you can expect these to be priced reasonably.
However, aluminum is lighter, making it a more portable option. With that said, the aluminum jack is probably going to cost more and won’t hold up against stress as well.
Of course, there are also hybrid options made from both aluminum and steel. The manufacturer might choose to use steel for the jack parts that support the car’s weight but use aluminum elsewhere to keep the weight down. For the most part, the hybrid jack is the perfect balance for everyday applications.
Weight Capacity
Once you decide what material you want from your floor jack, it’s time to think about how much weight it needs to support. You should never lift anything with a jack that it’s not rated for.
Figure out the weight of your vehicle and pick a floor jack that can handle far more than that number. Remember, you might lift other vehicles in the future, so be sure to accommodate for anything else you might be driving.
Lifting Range
The floor jack is going to feature a lifting range, which shows the minimum and maximum height it extends. The minimum height shows how low to the ground the jack can be. If you have a low-profile vehicle, this number is important as the jack might not fit underneath the body.
The maximum lifting height is how high you can lift the vehicle. For the most part, 20 inches is more than anything you should ever need unless you are replacing off-road tires, which can be much larger.
Saddle Size
The platform size shows you how much surface area the jack contains. This is the part of the jack that comes in contact with your vehicle. The larger the saddle size is, the more stable your job will be.
However, the larger platform size isn’t enough to determine which floor jack is the best. With some cars, a large saddle size might create instability because of how the chassis is constructed.
To be sure, look at the area under your car where you will put the jack. If there’s room for the larger saddle size, that’s your best option.
Price
We understand the importance of finding a cheap floor jack, but this isn’t a tool you want to sacrifice quality. After all, you will be under your car while it is on the jack. Do you really want to wonder if the jack is going to hold the car’s weight?
Instead, read through the best floor jack customer reviews to find a reasonably priced option from a reliable brand. It’s easy to find lower-cost jacks without giving up the features and durability that you need.
You may also consider evaluating the brand’s warranty, just in case anything should fail prematurely.
8 Best Floor Jack Options: Our Top Choices Reviewed
1. Pro-Lift F-767: Best 2-Ton Jack Review
Not everyone needs a heavy-duty jack to accomplish automotive jobs. Sometimes, the smaller, budget-friendly jack is all that’s needed. That’s why we started our list with this Pro-Lift option. This all-steel lift is meant for smaller cars. You can get your oil change or tire rotation done quickly with this easy-to-use option.
Because it is smaller, it is also simple to store. The lifting handle offers more convenience if you want to pick it up. Plus, it only weighs 30 pounds, so you aren’t going to break your back moving it around the garage.
This low profile jack might fit most compact cars well, but it doesn’t have a large lifting height. If you have a larger pickup or SUV, you are going to need more than this to get under your vehicle. Still, the customer reviews for this model prove it’s a durable, reliable option for smaller applications.
Features:
- Weight Capacity: 2 Ton
- Material: Steel
- Weight: 30 lbs.
- Lifting Range: 3.5” to 14”
- Dimensions: 17.91 x 5.32 x 8.47 inches
- Compact Design
| Pros | Cons |
| Lightweight | Doesn’t lift high |
| Ideal for smaller cars | |
| Bypass valve prevents over pumping | |
| Durable all-steel construction |
- Extra low profile
- Lifting range of 3-3/8 inches to 15 inches. The solid steel construction and safety release valve were features included to secure user safety
- Patented bypass device protects against over pumping for safe operations
- Built-in safety valve provides overload protection
- Heavy duty steel construction provides long term durability
2. Pittsburgh Automotive Heavy-Duty: Best 3 Ton Jack Review
No products found.
There’s no question that this Pittsburgh floor jack is one of the best values out there. Not only is it a low profile jack, but it also has the features you are looking for. The 3-ton capacity ensures you can lift a variety of vehicles from your teenager’s compact car to your big truck.
The wide lifting range also offers plenty of options for more versatility. With the rapid pump dual piston construction, lifting takes far less effort than some other options. With four pumps, you can have your car in the air.
The extra-wide wheels are constructed of steel. Not only does this ensure stability, but it keeps the load spread out better, especially when working on softer surfaces. Plus, the jack is made of all steel for more durability. However, this isn’t a lightweight model. You aren’t going to want this in the back of your car for emergencies.
Features:
- Weight Capacity: 3 Ton
- Material: Steel
- Weight: 75 lbs.
- Lifting Range: 2.875” to 19.75”
- Dimensions: 28 x 12 x 10 inches
- Extra-Wide Steel Casters
| Pros | Cons |
| Versatile | Heavy |
| Rapid pump dual piston construction | |
| Durable steel design | |
| Easy to use |
No products found.
3. JEGS Professional 2 Ton: Best Low Profile Jack Review
If you would rather have an aluminum floor jack, you might prefer this option from Jegs. It weighs just about fifty pounds, making it a lighter option. It also has side handles for convenient lifting when portability is required. The two-piece pump handle offers easy storage in your trunk or garage utility closet.
As with our last model, this floor jack contains a dual-piston rapid pump construction for fast lifting. Plus, the saddle is protected by a rubber pad. You won’t have to worry about leaving scratches on the vehicle’s underside while working. While the jack itself is made from aluminum, the rear casters and front wheels are constructed of steel for more stability.
Additionally, this jack features a wide lifting range for a multitude of applications. However, the 2 ton weight capacity on this model means it can’t be used on larger vehicles. If you have a truck or SUV, you will prefer a 3 ton jack instead.
Features:
- Weight Capacity: 2 Ton
- Material: Aluminum (body), Steel (wheels and casters)
- Weight: 51 lbs.
- Lifting Range: 2.5” to 19.25”
- Dimensions: 7.4 x 14.8 x 31.6 inches
- Side Handles
| Pros | Cons |
| Two-piece pump handle | Not meant for trucks or SUVs |
| Dual-piston rapid pump | |
| Hybrid construction | |
| Padded saddle |
- LIGHTWEIGHT ALUMINUM CONSTRUCTION allows you to roll jack around with ease
- LOW PROFILE DESIGN lifts from 3 ½ to 19 ¼ inches
- 360 DEGREE ROTATING SADDLE allows for easier movement
- RUBBER LIFT PAD prevents marring of surfaces
- OPTIONAL JACK SKID available separately to use safely on dirt, gravel, and grass
4. Arcan Floor Jack: Highest-Lifting Review
Having a long reach is essential if you want to create more distance between the vehicle and the ground. The Arcan low profile jack can take your vehicle to new heights – reaching up to 24 inches. However, you can’t simply choose a jack based on how high it goes. That’s why the Arcan makes our list.
The low profile trolley is perfect for getting under almost any vehicle. Instead of being much higher than the wheels, the saddle pad sits at just the right spot. Plus, the dual pump pistons mean you get your vehicle in the air faster, even at the higher heights. With the extra-long chassis, you can reach even further under the vehicle, which is needed with sports cars that have lifting points further underneath.
This jack will only lift 2 tons, but it is constructed of steel for maximum durability. However, with that steel construction comes weight. At nearly 100 pounds, you aren’t going to take this jack on the go with you.
Features:
- Weight Capacity: 2 Ton
- Material: Steel
- Weight: 97 lbs.
- Lifting Range: 2.75” to 24”
- Dimensions: 32.5 x 8.25 x 11.2 inches
- 32” Extra Long Chassis
| Pros | Cons |
| High lifting height | Heavy |
| Dual-piston rapid pump | Doesn’t lift larger vehicles |
| Solid steel construction | |
| Reaches far under car |
- COLORS MAY VARY: XL2T = A20016
- LIFT RANGE Provides the lowest low height (2 75”) and the highest high height (24”) compared to the average jack
- LOW PROFILE FRAME For easy access under low ground clearance vehicles
- DUAL PUMP PISTONS Quickly raises the floor jack saddle to load
- STEEL CONSTRUCTION For heavy duty use
5. Torin Big Red Jacks: Best Budget Floor Jack Review
At first glance, you might not think this price is that great, but after a second glance, you realize this is a 3 ton jack. Most heavy-duty jacks like this cost far more. If you want a decent jack for less, this option is sure to impress.
This jack is perfect for SUV or truck owners but can also be used with your coupe or sedan. The BIG RED is made with heavy-duty steel and has a high reach. However, it is not low-profile, so it might not fit under your sports car.
The large steel casters in the front combined with the rear 360-degree swivel caster ensure complete maneuverability. Plus, this jack features an extra-long saddle neck for more support. Sadly, it doesn’t have a dual piston mechanism, so you will need more time to lift. For the price, it’s hard to complain about these small matters.
Features:
- Weight Capacity: 3 Ton
- Material: Steel
- Weight: 45 lbs.
- Lifting Range: 5.875” to 20.875”
- Rear 360-Degree Swivel Casters
| Pros | Cons |
| High lifting height | Not low profile |
| Exceptional maneuverability | Single piston pump |
| Solid steel construction | |
| Reasonable price |
- Hydraulic trolley floor jack is providing long term durability with an industrial luster
- Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Features a 3 ton (6,000 LB) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs
- Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles.Handle Length:24.5 inches
- Single piston quick lift pump allows you to easily raise the jack to the desired height; Safety bypass system prevents over-loading and ensures safe operation.Rubber-tipped tongs
- Extra long saddle neck saves time when lifting higher vehicles; Includes a limited 1 year manufacturer warranty
6. TCE AT84007U Torin Hydraulic: Best 4 Ton Jack Review
If you need maximum capability out of your jack, it doesn’t hurt to upgrade to a 4 ton option. This hydraulic jack can handle your vehicle needs and help with industrial applications as well. The dual piston pump is going to lift the load five times faster than other single pump jacks.
Plus, there’s a wide lifting range, sure to get your vehicle up in the air. However, the starting range is at four inches, which might not be low enough to get under your sports car. With the wide stance, this jack is sure to provide the stability you need under heavy loads.
Plus, the front has large steel casters and the rear features 360-degree swivel casters to help you maneuver this jack with ease, even though it weighs 100 pounds. With the built-in safety overload, you can’t use the jack over capacity, which provides more safety. Most people aren’t going to need a jack this capable, but if you do, it’s good to know it exists.
Features:
- Weight Capacity: 4 Ton
- Material: Steel
- Weight: 100 lbs.
- Lifting Range: 4” to 20”
- Dimensions: 8 x 16 x 31 inches
- 2-Year Warranty
| Pros | Cons |
| Holds plenty of weight | Heavy |
| Dual piston pump | Not low profile |
| Rear 360-degree swivel casters | |
| Stable, solid construction |
- Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity
- Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs
- Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load
- Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability
- Features a built-in safety overload system prevents use beyond load capacity; Meets ASME safety standards and includes a 2 year limited manufacturer
7. OTC HDJ5P Air Hydraulic Jack: Best 5 Ton Jack Review
If money is no option and you want the best of the best, you might as well splurge and get this air hydraulic jack. This is a great tool for home garages, commercial service operations and industrial applications.
The welded hydraulic cylinder and pump construction ensures there are no leaks and you get the strength you need for the heaviest equipment. Plus, the chrome plated ram provides better rust protection, while the wiper seals keep contaminants from the hydraulic system.
The front wheels contain roller bearings combined with ball bearings, while the mounted rear casters offer superior maneuverability and better stability. With the overload and bypass safety valves, you can’t push this jack beyond capacity, although we aren’t sure how you would ever try.
Features:
- Weight Capacity: 5 Ton
- Material: Steel
- Weight: 196 lbs.
- Lifting Range: 5.875” to 22”
- Dimensions: 64 x 16 x 13.25 inches
- 2-Year Warranty
| Pros | Cons |
| Holds 5 tons | Expensive |
| Welded design | Won’t fit under low cars |
| Stable design | |
| Bypass and overload safety valves |
- Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more
- Welded hydraulic pump and cylinder construction provides increased strength and leak prevention
- Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts
- Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty
- Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram
8. ROGTZ 3 Ton: Best Electric Car Jack Review
No products found.
If you are hoping to find an electric hydraulic jack instead, this option might suit you. With 3-ton capability, it can lift a variety of vehicles with ease. It only lifts to 17 inches, but that is more than enough in most situations. Plus, it can reach 17 inches in just two minutes, making it easy for anyone to work on their vehicle.
If you are using the lift at night, you will be thankful for the built-in LED flashlight. Plus, it is completely waterproof, making it simple to use in any weather. With the convenient jump starter function, you can also revive a dead battery from anywhere.
The best part is this kit comes in a handy toolbox, making it simple to take on the go. Just about anyone can operate this jack to change a tire. Keep it in the trunk for use anywhere, in any emergency.
Features:
- Weight Capacity: 3 Ton
- Material: Metal
- Weight: 13 lbs.
- Lifting Range: 5.65” to 17”
- Dimensions: 17 x 10.3 x 5.3 inches
- Portable Tool Box
| Pros | Cons |
| Portable | Not as durable |
| Built-in flashlight | Not low profile |
| Comes with toolbox | |
| Includes jump starter |
No products found.
Other Types of Jacks
The floor jack isn’t the only option you can choose. Consider these other jack types to see if a different model might suit you better.
Scissor Jacks
The scissor jack is operated by hand and doesn’t have hydraulics. This is the most common type of jack found in the vehicle for roadside emergencies and often confused for small screw jacks. However, because it is designed for portability, it isn’t often as efficient as the floor jack.
- Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car
- Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity
- Engineered using a drop forged alloyed steel construction for quality and durability
- Equipped with an extra-wide base which adds stability and strength; 1 piece handle delivers on-the-spot quick response and speed
Bottle Jacks
This jack is heavy and compact. It is used to lift a large amount of weight quickly. The bottle jack requires less energy to operate than a scissor jack. To use a bottle jack, just put your tire iron into the part’s plunger and give it a few pumps.
- The product is 4Ton bottle jack
- Easy and simple use kit. U.S. Patent No. 5,946,912
- The product is manufactured in china
- Steel lifting saddle engineered to hold load securely
- Extension screw adjusts to accommodate desired work height
Farm Jack (High Lift) Jack
This unique jack pushes, pulls, clamps, winches and lifts. It’s used most often on the farm because of the versatility. In fact, it’s known as the handyman jack because of everything it can do.
- Multi-functional farm jack is great for lifting tractors or heavy trucks, pulling posts and poles, and even serves as an all-purpose hoist or winch
- Adjustable top-clamp clevis can clamp at any position on the upright steel standard
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Wide base prevents the jack from sinking into soft surfaces such as asphalt
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
Motorcycle Jack
When you need to lift your motorcycle, you want this special table that raises your bike safely. With this table, it’s simple to change a tire or perform maintenance on your motorcycle without creating too much strain.
- Ultimate Motorcycle Support: Effortlessly lift motorcycles weighing up to 1100 lb. with this ready-to-use motorcycle scissor jack from Orion Motor Tech, ensuring easy maintenance for your cruisers, dirt bikes, and other motorcycles
- Enjoy Effortless Lifting: With a simple turn of the included T-handle or using the 3/8" socket and ratchet wrench, effortlessly lift your motorcycle from 3.7" to 14.6". This makes it easy to perform repairs comfortably at the ideal height
- Safe and Stable Operation: The 9.1"x14.6" wide deck on our motorcycle jack stand offers a stable and spacious platform for your motorcycle, preventing it from tipping or shifting while it is lifted or lowered
- Designed for Heavy Use: Made of heavy-duty steel, our motorcycle lift stand provides superior strength and long-lasting corrosion resistance. Plus, the rubber tabletop securely holds your motorcycle in place at all times
- Enhanced Strength: The plug welding and double crossbar design on this motorcycle table lift ensures a strong and durable construction, with seamless joints that enhance the overall appearance and performance
Floor Jack Accessories
The floor jack works well with other accessories. If you want a complete garage, consider having these tools on hand too.
Jack Stands
You should never get under the vehicle when it is only on a floor jack. Instead, you need to place jack stands under the car as well. Make sure you choose AC Delco jack stands that can safely hold your vehicle’s weight.
- Sturdy stamped Steel Construction with 6 ton capacity
- High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in
- Double locks mechanism with both handle locks and mobility pin
- Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
- Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
Wheel Chocks
The wheel chocks prevent your vehicle from rolling backward off of the jack. You can use this with the parking brake to ensure your car doesn’t roll. We recommend finding a pair of wood or high-quality rubber chocks.
- Compact Size: Measuring approximately 8 inches in length, 4 inches in width, and 5 inches in height, these wheel chocks offer a convenient and space-saving solution for securing your vehicle or trailer.
- All-Weather Construction: Built for durability in any climate, these wheel chocks feature all-weather construction, ensuring reliable performance and security in various weather conditions.
- Enhanced Traction: Equipped with a rubber traction pad, these wheel chocks offer superior grip and traction to keep your vehicle or trailer securely in place, even on slippery surfaces.
- Convenient Design: Featuring a built-in handle, these wheel chocks allow for easy placement and positioning, providing added convenience during use.
- Superior Performance: Designed to outperform plastic or resin-made wheel chocks, these solid rubber chocks offer exceptional durability and reliability for keeping your vehicle or trailer stationary.
Mechanic Creeper
To get under the vehicle, you want a low profile creeper. While lying on your back, it’s easier to find everything you need under the car.
- Easily converted from creeper to seat for your maintenance convenience.Fit Type: Universal Fit
- Thick padded cushions create a comfortable base for easy access and movement during your maintenance tasks
- 6 swivel casters for easy maneuverability. Vinyl padded seat and headrest
- 300 pounds weight capacity
- Easily retractable pin to change seat
Car Ramps
If you only need to raise the front of your car slightly, you might prefer car ramps. With these ramps, you drive the vehicle onto the platforms to get a little additional height.
- Portable automotive ramps with a rugged and structural design
- Provides reliable and convenient access to the underside of your vehicle as well as nestability for maximum storage space
- CoreTRAC non-skid base helps reduce slippage
- 17 degree incline provides easy use for low clearance vehicles
- 12,000 pound GVW (gross vehicle weight) capacity and for use with tires 9" in width
Transmission Jack Adapter
Most floor jacks weren’t designed to hold a transmission securely in place. However, you can use your floor jack for this application with the right adapter.
- ADAPTABLE: Transforms your floor jack into an project-ready transmission jack
- COMPATIBILITY: Transmission jack adapter fits heavy-frame floor jacks with a larger 1-5/32-inch (not a 1-inch) saddle post hole
- HEIGHT: Adds only 11 inches of height to the base of a floor jack allowing removal of transmission without a lift
- 300 LB. CAPACITY: Suitable for removing and installing passenger car and light-duty truck transmissions
- ADJUSTABLE TILT: The adjustable tilt knob allows you to tilt the platform to the desired angle for ease of removal and safety
Operating the Best Floor Jacks
You don’t need huge muscles to use a floor jack. You just need to know the basics of floor jack operation. Whether you want to change a tire, put in a new transmission or change the oil, these are the steps you would follow to use your floor jack.
- Park your vehicle on flat, level ground. The ground should be stable, not sand- or gravel-covered.
- Use wheel chocks to brace the vehicle.
- Apply the parking brake
- Find the vehicle’s jack point. This information can be found in your car owner’s manual.
- Line up your floor jack with the jack point.
- Begin pumping the lever.
- Once the car wheel is in the air high enough, you can line up your jack stands.
- Lower the vehicle to rest on the stands.
- You are ready to perform maintenance or repairs to your vehicle.
- Once you are finished, raise the jack up so you can remove the stands.
- Carefully lower your vehicle.
- Remove the wheel chocks before driving away.
Here’s some more helpful instructions.
Floor Jack Safety
With the instructions that you just learned, there are some very important safety considerations to follow
- Never jack your vehicle from a place that has rust or shows signs of metal fatigue.
- Check the wheels before you jack.
- Never use blocks to increase the height.
- As soon as you can, use jack stands for additional support.
- Pump your jack slowly and use even strokes.
- Inspect the floor jack before you use it. If there are signs of damage or wear, don’t rely on it.
Floor Jack FAQs
When should I use a floor jack?
You will use a floor jack whenever you need to get under the vehicle. If you are doing tire changes, oil changes or you need to perform maintenance on the transmission, the floor jack is going to be an invaluable tool.
What size floor jack do I need?
The floor jack comes in a variety of sizes, based on the weight capacity. For a smaller jack, you can find options that hold 1 ton, but you might need something that holds 3 tons or more. We always recommend choosing a jack that holds far more than what your car is rated at. Plus, if you are using your jack for multiple vehicles, you want to figure out the weight of the heaviest.
Where do I find my vehicle’s weight?
The vehicle’s weight can be found on the driver’s side door. You will see an information card that shows data such as the vehicle’s weight and tire pressure limits. If that isn’t in its place, check the owner’s manual.
Why do I need a low profile floor jack?
If your vehicle sits low to the ground, you might not be able to get a standard floor jack underneath. The low profile floor jack sits down closer to the ground, which is necessary for many sports cars.
Who needs a 5 ton floor jack?
While you might not need a 5 ton floor jack to lift your compact car, some heavy-duty trucks or SUVs could require this capability. Plus, it’s always best to choose a jack that holds more than the car weight, just to be on the safe side. These heavy-duty jacks are good for industrial applications if you want more than automotive help.
Who makes the Snap-on Floor Jack?
You can’t purchase a Snap-on floor jack just anywhere, but must get in contact with a sales rep. Snap-on is an American tools company that produces heavy-duty equipment, mainly sold to professional mechanics. However, Snap-on also distributes lower-end products under the brand name Blue-Point.
Conclusion
With so many floor jacks to choose from, it can be difficult to determine which option is best. We’ve gone through a variety of sizes and brands to help you find the best floor jack for your application. With this invaluable tool, your car maintenance and repairs will be easier than ever.
Here’s a summary of our top 8 best floor jacks:
- Extra low profile
- Lifting range of 3-3/8 inches to 15 inches. The solid steel construction and safety release valve were features included to secure user safety
- Patented bypass device protects against over pumping for safe operations
- Built-in safety valve provides overload protection
- Heavy duty steel construction provides long term durability
- LIGHTWEIGHT ALUMINUM CONSTRUCTION allows you to roll jack around with ease
- LOW PROFILE DESIGN lifts from 3 ½ to 19 ¼ inches
- 360 DEGREE ROTATING SADDLE allows for easier movement
- RUBBER LIFT PAD prevents marring of surfaces
- OPTIONAL JACK SKID available separately to use safely on dirt, gravel, and grass
- COLORS MAY VARY: XL2T = A20016
- LIFT RANGE Provides the lowest low height (2 75”) and the highest high height (24”) compared to the average jack
- LOW PROFILE FRAME For easy access under low ground clearance vehicles
- DUAL PUMP PISTONS Quickly raises the floor jack saddle to load
- STEEL CONSTRUCTION For heavy duty use
- Hydraulic trolley floor jack is providing long term durability with an industrial luster
- Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Features a 3 ton (6,000 LB) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs
- Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles.Handle Length:24.5 inches
- Single piston quick lift pump allows you to easily raise the jack to the desired height; Safety bypass system prevents over-loading and ensures safe operation.Rubber-tipped tongs
- Extra long saddle neck saves time when lifting higher vehicles; Includes a limited 1 year manufacturer warranty
- Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity
- Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs
- Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load
- Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability
- Features a built-in safety overload system prevents use beyond load capacity; Meets ASME safety standards and includes a 2 year limited manufacturer
- Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more
- Welded hydraulic pump and cylinder construction provides increased strength and leak prevention
- Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts
- Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty
- Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram
